Model Number

NCF1087

You can contact 008613964252961 or jason_machinery(at)hotmail.com to get more information.
A. Machine：
NCF series is the latest generation of fixed Bridge style high accuracy high speed Coordinate Measuring Machine from LEADER
Contact:008613964252961 Jason Yang
NCF serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.
Design Characteristic
- Granite fixed worktable, all three axes are made of high performance granite, good temperature characteristic, have the same coefficient of thermal expansion.
- Granite worktable with integral ?ual-dovetail?guide in X axis, eliminate the pitch and yaw ,also provides superior motion stability.
- Z-axis air-balance with self-protection, improve motion capability.
- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stabilit, lower noise.
- High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped
- Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes movement..
- RENISHAW steel scale
- Famous parts from all over the world are used in every important sub systems
NCF 1087 Performance Specifications
Measuring Strokes :1000(mm) x 800(mm) x 700(mm)
Overall Dimension : 2550(mm) x 1700(mm) x 3200 (mm)
Max part weight : 700 kg
Resolution : 0.1 (mm)
Accuracy according GB/T16857.2-1997 equal ISO 10 360：
Volumetric length measuring error E =1.6 +L/300 [mm]
Volumetric Probing Error R =2.0mm
Environment Specifications
Room required specifications
- Average room temperature: 19 - 21 ?
- Maximum thermal gradients:0.5 ?/小时，1 ?/天，0.5 ?/米，
- Air supply system
- Min. air pressure : 0.7 MPa
- Min. air consumption : 0.1 m3/min
Electrical requirements
- Voltage : 220 Vac ?10%
- Frequency : 50 Hz
- Current : 10 A



Allowed Maximum Floor Vibration
- Frequency Range: 0 ~ 19 Hz 19~75 Hz > 75 Hz
-Maximum Amplitude: 0.0011 mm 0.0011~0.002 mm 0.002 mm